What are the operating methods and precautions for plaster bandages?

Update:2021-11-22 00:00
Method of operation
1. Dipping: Dip a roll of product into warm water at an angle of 45 degrees until no continuous bubbles are generated.
2. Squeeze: Take out the product and squeeze it from both ends to the middle with both hands.
3. Winding: Wind the product evenly on the affected area.
4. Leveling: When bandaging is implemented, leveling should be done by hand while bandaging.

1. When dipping the plaster bandage, the water temperature must be 25℃-30℃, and the immersion time should be about 5-15 seconds.
2. The winding process of the plaster bandage must be completed within its curing time.
3. Store in a room with a relative humidity of no more than 80%, no corrosive gas, and good ventilation.

Contact Us

*We respect your confidentiality and all information are protected.